If you have one Internet connection and lots of computers, Mobiles, PDA, Ipods etc. in your home, how are you going to share Internet access between all of them simultaneously?
How to do this?
Router – It is the instant way to setup easily a Home Wireless Network. All you have to do is to connect the router to the ISP Modem and use Wi-Fi enabled devices to connect to the router if they are within its signal range.
A wired or wireless Router is actually a Layer 3 Gateway, if you know about the OSI Layered Model. Home networks use the Internet Protocol (IP) for either a wired or for a wireless router connection. TCP/IP is the defacto network communication protocol (it is the OSI network and transport layer). TCP/IP Routers like DSL or Cable Modem Routers connect a Local Area Network (LAN-Home Network) to the Wide Area Network (WAN) of the Web (i.e the Internet)
Requirements
* A Broadband Internet Connection (I recommend a High Speed Broadband connection. Otherwise, there is chance to face problems regarding file downloading). *Wireless Network Card which should be installed on each computer that you wish to connect to the wirelesss network. Most devices are already equipped with an embedded wireless card. * A Wireless Broadband Router
Advantages of a Home Network Router
* For Sharing your Internet connection between more than 2 computers. * For sharing Printer and other Computer Peripherals. * Sharing Game consoles and other Home Entertainment Systems.
It will find any deleted and lost data from your hard disk. Data can be lost for several reasons such as your system lost the partition table or if by mistake you have done quick format or if your system crashed unexpectedly. You can recover all these lost data with the help of Spotmau Powersuite 2010.
Spotmau however cannot recover data from physically damaged drive.
It also finds and repairs crashed boot sectors.
Finds missing files and repairs the errors.
Recovers lost or forgotten passwords.
By using this software you can back up the entire system.
How to use Spotmau Powersuite 2010
No matter what you have deleted, that means, if you have deleted videos or pictures or audio files from you disk drive or if you formatted your media storage disk or during write process if you pulled out your media storage, Spotmau Powersuite 2010 program can reconstruct data automatically.
If you lost data in your smartcard within a digital camera and you want to recover the data then simply connect your camera to your PC and run Spotmau Powersuite 2010 tool to recover the lost data. You can recover the lost data from flash card, memory stick, micro drive, compact disk and smart media cards.
Other General Features of Spotmau Powersuite 2010
It supports the file format of FAT 12, FAT 16 and FAT 32 and NTFS.
It supports Windows 95, Windows 98, Windows ME, Windows NT, Windows 2000, Windows XP, VISTA and Windows 7.
It can recover files and store them on an external drive.
This tool is available in different languages such as English, Chinese, Danish, Czech, Dutch, German, French, Estonian, Hungarian, Greek, Japanese, Polish, Norwegian, Italian, Portuguese, Russian, Turkish, Swedish, Spanish and Romanian.
It finds and fixes crashed boot sectors.
Improves the disk performance and optimizes the computer.
Improves the system speed.
Protects from identity theft
It protects your privacy from other people in the network.
If you have confidential files then it can hide those files and protect with password which are visible to you only.
By using this software you can encrypt and decrypt files.
It will free up system resources and it will help you to find hidden programs.
You can also change or recover the Windows Admin password
You can clean the disk to increase your system performance
Conclusion
By using Spotmau Powersuite 2010 tool you can rescue lost data from your hard disk very easily. Comparing to other tools, spotmau is very easy to understand and quite easy to use to recover lost data. If you are newbie to computer field don’t worry. Use Spotmau Powersuite 2010 tool, which works like All-In-One tool to help you fix many more problems in addition to recovering lost data.
A common problem for many people is a hacked google account even though it is not a frequent problem.
Every day many people are searching in Google about “how to hack Google accounts” , but searching this in Google is just like asking an owner to give his key of his company for free!
For this process ( I mean for “getting back your g-mail account”) , even though it is a bit “official” we can go asking Google for help (Well they can’t deny the complaint, of a user).
Some of the options suggested by Google Support when your forget the G mail password or if someone else takes ownership of your Google Account and changes the password are listed below:
Reset Your Google Account Password
Type the email address which is in connection with your Google Account or G mail user name at google.com/accounts/ForgotPasswd – You will get an email at your secondary email address with a link , which when clicked will redirect to a page which will help you to reset your password for the g mail account.
For Google Accounts connected with G mail
If you have problems with getting into your G mail account, you can ask google to consider your problem by filling the form at http://www.google.com/support/accounts/bin/request.py. However this process can only be made possible only if you remember the exact date when you created your g-mail account.
For other hacked Google accounts which have no connection with your g-mail account:
If your Google Account is not attached with a G mail address, contact Google by filling the questions at http://www.google.com/support/accounts/bin/request.py. This process may help you get back your Google Account if you determinedly preserve all of your old emails. This process also requires the exact date of your Google Account creation attached with a copy of the original “Google Email Verification” message.
If any of the above methods fails try creating another Google account and tell your g-mail friends to re-sent you the lost e-mails.
Do you feel that your Computer monitor is getting a little bit dirty? Most probably you may not like your computer on such a bad condition. Right?
In this Post I will explain you about Cleaning your Computer Monitor using Different Techniques. Even if it is a Laptop computer or Personal computer, an LCD Monitor or CRT Monitor – These Tricks will work.
Cleaning material I Need
A Soft Piece of Cloth (Dry and Wet)
Rubbing Alcohol
Non-abrasive Rag/Anti-static rag
Your computer Service Center Number
Correct Cleaning Steps
If your monitor is LCD get a soft non-abrasive rag/anti-static rag and bit of rubbing alcohol. If you are using CRT monitor purchase a specialty cleaning kit (You’ll get it from Electronic stores).
Create a Small Solution of Rubbing Alcohol and pure water for cleaning an LCD Monitor. Spray the solution you made to the Soft rag. After keeping it for a minute, Wipe the monitor in the same direction (be careful because there is chance for scratch appearance).
Make sure that the water is not falling in other parts of Computer like Keyboard, mouse etc. Especially if you are using a Laptop. While Cleaning the monitor don’t wipe in a circular direction which may cause smudging.
Leave your monitor alone for some time to get it dried. If it is still looking dirty, Continue the steps I have explained before.
Take a Soft Piece of Cloth and dip it in the water. Wipe the Monitor using the cloth very gently and carefully. Then wipe off the screen with a Dry Cloth.
Ensure that screen is completely dry before using.
Warning: Before Applying the above cleaning methods to your monitor, please call your Computer Service Center (A Place from where you bought your Computer) and ask whether they recommend any other method to clean your monitor. Most probably these tips are compatible but in some cases they can lead to several Display Errors.
It is not surprising news but Google officially announced this week its first Android phone, code-named Nexus One. Made by the Taiwanese HTC, the device will be sold through its online store and the price for the U.S. market will be around $ 529. If the consumer wants to buy a connection package from T-Mobile (unfortunately it doesn’t look like this model will be available as one of the T-Mobile prepaid phones), the price may be reduced to $ 179.
Nexus One can be used on any GSM network, but is designed to operate in its best potential at 3G frequencies. Currently online sales are restricted for only consumers in America and will soon open its “gates” to the respective markets in Singapore and Hong Kong. Google has also stated that Verizon and Vodafone will play a more active role in the immediate future of Nexus One.
The agreement for selling at Europe is not binding for Vodafone, as a spokesperson for the well-known company stated in BBC, which means that other mobile providers can support the device on their network. The Nexus One, as expected, will be equipped with 3.7-inch touch screen with AMOLED technology, 5MP Camera, connectivity via Wi-Fi, accelerometer and built-in compass. Its processor will be the Qualcomm Snapdragon at 1GHz and its front bottom trackball will be flashing when the phone receives e-mail or call.
The version of the Android operating system to be included in Nexus One will be the 2.1 with the code name Eclair and it is worth noting that the same version is also used at Motorola Droid. Currently you can find at the official website of the product all necessary details, while the following youtube video shows you a snapshot of the device from a hands-on user who has had the opportunity to come into direct contact with it.
